Machining Technology
News
August 25, 2008
Unbeatable flexibility – Ideo bridges the gap between Machining Center and Transfer Machining System ...
June 11, 2008
CrazyDrill shows grandeur ...
May 28, 2008
MikroNews Nr. 6 ...

Events
September 8, 2008
IMTS 2008 ...
September 9, 2008
AMB 2008 ...

Search
Home > Machining Technology
News

Monday, August 25, 2008
Unbeatable flexibility – Ideo bridges the gap between Machining Center and Transfer Machining System
Specialists in the metal manufacturing such as sub suppliers in the fitting and pump industries are daily challenged to come up with better flexibility and productivity. This is also true for work pieces which need to be machined from casting blanks. Format and material from part to be machined, and its whole geometry oft changed very quickly. The customer requires an optimal quality Just-in-Time (JIT) or Just-in-Sequence (JIS). For this typical supply situation, the machining specialists at Mikron Machining Technology have developed the Ideo concept. The Ideo system allows the complete 6-sided machining of two prismatic work pieces of up to 250mm cube in one single clamping. The Ideo clamping system on one side and the two completely independent machining stations assure best possible flexibility.
Wednesday, June 11, 2008
CrazyDrill shows grandeur
CrazyDrill from Mikron Tool exists since almost 10 years. The successful, worldwide application of this high performance drill in a diameter range from 0.8 to 4 mm has induced Mikron Tool SA Agno to expand the diameter range, first to smaller and now also to bigger sizes up to 6 mm. The cutting parameters? CrazyDrill users are very demanding! A long-term test with Ø 5.35 mm in 100Cr6 and a cutting speed of Vc = 60 m/Min. and a feed rate of f = 0.4 mm/1 has even exceeded the ambitious targets concerning hole quality and tool life.
Wednesday, May 28, 2008
MikroNews Nr. 6
100: More than one reason to celebrate!
Thursday, April 10, 2008
Mikron Tool supplies high performance drills to the mould and die manufacturing industry
Moulds and dies for any field of application require demanding, customer tailored solutions.
Tuesday, March 25, 2008
MikroNews Nr. 5
Every day a masterful performance!
Tuesday, December 18, 2007
MikroNews Nr. 4
Do you have a handle on your time?
Thursday, September 27, 2007
Review EMO 2007
Favorable balance for Mikron Machining Technology
Friday, September 21, 2007
Mikron Machining Technology widens its product portfolio
Mikron Machining Technology completes its range of machining systems with two product lines – Ideo and Namco – which allow to offer solutions up to speed with modern production needs, requested by the chip removal sector.
Thursday, September 6, 2007
Latest edition of the Newsletter of Mikron Machining Technology
MikroNews 3: Image - is it the right one?
Thursday, August 2, 2007
Mikron Tool will introduce at EMO 2007 a new drill line 'MiquDrill'
The right drill in the right place

Print page Top